Hishiko Corporation：Permanent Magnetic Rail

■Transportation System MENU TOP

Permanent Magnetic Rail　KPML

KPML

KPML

Applications

KPML is installed under the conveyor belt and holds workpieces, like punching die, cans, various parts and products, during transportation.

Features

KPML-A Type

KPML-A type has fine pole pitch. This structure is suitable for an angled conveyor and a vertical conveyor.
KPML-A type has M10 or M12 bolts at side surface. Using these bolts and nuts, KPML-A type is fixed at frame.

KPML-B Type

Compare to other type, KPML-B type can attract magnetic body from farther place.
So B type is used for holding a thin steel plate on a hanging conveyor.
KPML-B is mounted by M8 bolts from the upper surface.

KPML

KMPL-A　　Maximum Flux Density　0.1T(1,000G)

Stock No.	Model	Dimensions (mm)					The Number of Tapped Hole	Weight(kg)
Stock No.	Model	W	L	H	ℓ	ℓ1	N	Weight(kg)
S962206	KPML5・50A	48	500	34	230	200	3	5
S962207	KPML5・100A	48	1000		230	300	4	10
S962208	KPML10・50A	96	500		300	200	3	10
S962209	KPML10・100A	96	1000		300	300	4	20

KPML

KPML-B　　Maximum Flux Density　0.1T（1,000G）

Stock No.	Model	Dimensions (mm)					The Number of Tapped Hole	Weight(kg)
Stock No.	Model	W	L	H	ℓ1	ℓ2	N	Weight(kg)
S962211	KPML5・50B	52	500	34	150	-	2	5
S962212	KPML5・100B	52	1000		350	-	3	10
S962213	KPML7・50B	72	500		150	40	4	8
S962214	KPML7・100B	72	1000		350		6	16
S962215	KPML9・50B	92	500		150	50	4	10
S962216	KPML9・100B	92	1000		350		6	20
S962217	KPML12・50B	122	500		150	60	4	15
S962218	KPML12・100B	122	1000		350		6	30

　Page TOP　　Back

SiteMap Terms of Use

copyright © 2019 Hishiko Corporation All Rights Reserved.