Hishiko operates Magnet Applied Equipment division (formerly known as Fuji Jikoh Co. Ltd.)&Special Welding Consumables division.

Pure Nickel cold welding on cast iron. Good welding activity.  Crack repairing, filling of defects, joint welding on cast iron, overlaying and repairing on mould and cylinder block, cast iron tube, machinery fixture repairing and joint welding.

Cold welding covered electrode (55% Nickel) with Iron and Nickel clad rod. No over-heat during continuous welding with stable arc. Tensile strength of deposited metal, resistance to cracking and machinable. Usable with all-position.

The Nickel content of deposited metal is 40%. Good adherability in case of applying hard chrome-plating on mould for automobile after welding.

Iron/Nickel solid wire for overlaying on cast iron and Nickel content is about 55%. Less crack and blowhole and better bead appearance compared to flux cored wire. Most suitable for overlaying on mould.

Iron/Nickel MAG solid welding wire for repairing and overlaying on cast iron. Nickel content of deposited metal is about 40%. Good adherability in case of applying hard chrome-plating on mould for automobile after welding.